Before The First Use; Use Of The Programmes - Pkm WA6-812 Bedienungsanleitung

Power
Schleuderzahl
Temp
Start/Pause
An acoustic signal sounds, whenever you use any button or the rotary knob, start
1. Clean the appliance thoroughly. Be very careful especially inside the appliance
(look at chap. 7).
2. Remove the packaging completely and remove the transport protection ( look at
chap. 4), otherwise you will damage the appliance.
3. The appliance must be correctly connected to the mains.
4. The appliance must operate one complete washing programme without
load first.
1. Fill some detergent in the container.
2. Press the POWER button.
3. Press the START/PAUSE button.
I. Pre-detergent or washing powder
II. Main-detergent, bleachers, decontaminating products
1. Plug in the appliance.
2. Check the proper condition of the water supply. Open the tap completely.
3. Put the laundry, the detergent and, if desired, a suitable washing additive into
the appliance
4. Press the POWER-button.
5. Select the desired functions.
6. Press the START/PAUSE-button.
1. Select the laundry to wash with the rotary knob.
2. Select the temperature relevant to the contamination level of your laundry. The
higher the temperature the higher the energy consumption.
3. Select the spinning rotation. The higher the rotation the dryer the washing.
Power
Spinning rotation
Temperature
Start/pause
the appliance or a programme has ended.

Before the first use

Starting of the appliance

Use of the programmes

Operation mode ON/OFF.
Sets the rpm of spinning.
Sets the temperature of a programme.
Starts/pauses a programme.
fabric softener, other aids
33