Water Connection - Pkm WA6-812 Bedienungsanleitung

9. Connect the appliance to the mains properly.
10. All required installations for the electric and water supply must be carried out
by a qualified professional.
11. The nameplate is situated at the back of the appliance.
You must remove the transport protection, before you can operate the
appliance.
Unscrew and remove all bolts with a spanner.
Insert the supplied covers. Store the bolts in a
safe place for future use.
1. Check that the feet are close to the housing.
If not, screw them with a spanner or by hand
back into their original position.
2. After installation press on the 4 corners on
the top of the appliance one after another. If
the appliance does not stand solid when
pressing on one of the corners, adjust the
relevant foot. Untighten the nut and adjust
the foot by hand. Now hold the foot with one
hand and tighten the nut on the appliance
with the other hand. Check the proper
adjustment with a bubble level.
1. Use the supplied hose-set only. Do not use any used components for
connecting the appliance to the water supply.
2. Appliances with a cold-water inlet valve can be connected to the cold-water
7
supply only.
3. Appliances with a warm-water valve can be connected to the warm-water
8
supply. The energy consumption of some programmes will decrease
automatically then.
7
Equipment depends on model.
8
Equipment depends on model.
Removing of the transport protection
Levelling

Water connection

29