Pkm WA6-812 Bedienungsanleitung Seite 30

Connect the water inlet as described in the
figure. If your appliance is equipped with a
warm-water inlet, connect the warm-water tap
with the warm-water inlet.
Connect the hose to the tap and the appliance
(elbow on the appliance). Tighten clockwise.
If water drains out after connection, repeat the entire procedure. If your tap does
not meet the dimensions of the connectors, you must install a suitable tap.
1. Lead the drain hose into a collection device, e.g.
a basin.
2. Connect the water outlet with the drain of a collection device, e.g. a basin.
Do not install the water outlet lower than 100 cm. The end of the outlet hose
must not immerse in water.
Water supply
Drain water
30