Signalling Of The Pincode Field; Red Led - Simons Voss Technologies PegaSys 2.1 Kurzanleitung

PegaSys Wall reader stainless steel/
pin code 2.1/4.1
Optical signal
1x green flashing
2x red flashing
3x red flashing

10 Signalling of the PinCode field

Short green flashing
and beeping
Short green/red
flashing and beep-
ing
Long green beep
and flash
Long green/red
flash and beep

10.1 Red LED

Number of flashes
2 ×
EN
Acoustic signal
Can be parameterised
via door initialisation
card (flag sound dur-
ing motor )
2x beep
3x beep
Key entry
Entry rejected
PIN accepted, lock opens
Programming mode started
Meaning
The code entered is
too long.
10. Signalling of the PinCode field
Description
Badge authorised
Read error
Badge unauthorised.
Reason can be read in
DoorManager under
Diagnosis .
Sequence
The input can be cor-
rected; programming
mode continues.
29 / 64