Maintenance; Reset On Stainless Steel Reader (Up To Firmware 4.X) - Simons Voss Technologies PegaSys 2.1 Kurzanleitung

PegaSys Wall reader stainless steel/
pin code 2.1/4.1

6 Maintenance

7 Reset on stainless steel reader
EN
7. Close the reader completely and lock it.
8
8. Connect the power supply.
9
9. Reset the reader to delete any stored data.
10. For wall reader 2.1 stainless steel: Read in the facil-
ity card and the door INIT card one after the other.
11. For LEGIC wall reader 2.1 stainless steel: Read in the
SAM63 card to christen the reader.
12. For wall reader 2.1 stainless steel: Check the func-
tion with an authorised RFID identification medium.
Wall reader 2.1 stainless steel/PinCode ready for
9
operation.
The device itself is maintenance-free.
NOTE
Maintenance of electric strikes
Different electric strikes require different maintenance
measures.
Maintain electric strikes in accordance with the

manufacturer's specifications.
(up to firmware 4.x)
10
1. Disconnect the power supply.
6. Maintenance
27 / 64