Intended Use - Simons Voss Technologies PegaSys 2.1 Kurzanleitung

PegaSys Wall reader stainless steel/
pin code 2.1/4.1
Communication interference due to metallic surfaces
This product communicates wirelessly. Metallic surfaces can greatly re-
duce the range of the product.
Do not mount or place the product on or near metallic surfaces.

Qualifications required
The installation and commissioning requires specialized knowledge.
Only trained personnel may install and commission the product.

Modifications or further technical developments cannot be excluded
and may be implemented without notice.
The German language version is the original instruction manual. Other
languages (drafting in the contract language) are translations of the
original instructions.
Read and follow all installation, installation, and commissioning in-
structions. Pass these instructions and any maintenance instructions to
the user.

2 Intended use

EN
NOTE
Intended use
PegaSys-products are designed exclusively for open-
ing and closing doors and similar objects.
Do not use PegaSys products for any other pur-

poses.
The wall reader reads RFID identification media and
switches a relay to control electric strikes.
Any other use is not in accordance with the intended
purpose and is not permitted.
2. Intended use
25 / 64