Setting Up And Aligning The Appliance - hanseatic HFD18983CI Gebrauchsanleitung

About climate categories
• Always ensure the prescribed ambient temperature is maintained (see "Intended use" on
page EN-5).
Climate category means that the appliance is intended for operation at the specified ambient
temperature.
Zone description
Extended temperate zone
Temperate zone
Subtropical zone
Tropical zone
If the room temperature drops significantly below this, the unit will not switch on as often. This
indicates that an unwelcome increase in temperature may occur.
Setting up and aligning the
appliance
• Place the appliance on as flat and as firm
a base as possible.
• Check the position with a spirit level.
Code Definition
SN This refrigerator is designed for use at ambient temper-
atures of +10 °C to +32 °C.
N This refrigerator is designed for use at ambient temper-
atures of +16 °C to +32 °C.
ST This refrigerator is designed for use at ambient temper-
atures of +16 °C to +38 °C.
T This refrigerator is designed for use at ambient temper-
atures of +16 °C to +43 °C.
• Level out any unevenness on the ground
using the two front appliance feet.
– Close the doors.
– Tilt the appliance slightly back and screw
– Stand the appliance back up again and
(7)
Start-up
in/unscrew the appliance feet (7).
check the alignment with a spirit level.
Repeat the process until the appliance
is standing up vertically. The appliance
should not move when opening the
doors.
Page EN-29