HellermannTyton Autotool System 3080 Montageanleitung Seite 10

f Set closure reel on reel rollers
1
; The reel uncoils anti-clockwise.
; The collar of reel brake
Overhead suspension 3080.
f Feed closure chain over guide roller
4
f Introduce closure chain
into closure chain guide
f Feed closure chain
through closure chain guide
4
ATS3080 .
6
f Make sure that the closure chain
4
8
f Open cover of ATS3080
8
f Insert closure chain
into the ATS3080
4
of first engagement.
; The LED in the display goes out.
; Closure chain locks firmly into place.
4
f Close cover of ATS3080
8
Assembly Instructions Overhead suspension 3080 • 03-2017 • v02 • 102-01013
.
3
holds closure reel on the
7 1
.
2
with the number facing up
4
.
5
5
is not twisted.
4
.
6
to the point
6
.
6
5 .1 .6 Inserting the strap reel
1
to
6
9
f Remove strap reel
f Press and hold down guide roller
; Reel brake is disengaged.
2
f Set strap reel
1
; The strap reel
1
; The collar of reel brake
Overhead suspension 3080.
f Feed strap over guide roller
4
closure chain guide
f Make sure that strap
f With the teeth facing up, introduce the end of strap
into the opening of the ATS3080
f Close latch
on the ATS3080.
8
; The red LED in the display goes out.
Installation
8
from its packaging.
1
.
3
on reel rollers .
9
uncoils clockwise.
holds the strap reel
2
and through eyes
3
.
5
is not twisted.
4
.
7
2
3
4
5
6
7
on the
1
of
6
4
10