Changing The Strap Reel; Changing The Closure Reel - HellermannTyton Autotool System 3080 Montageanleitung

6 .4 Changing the strap reel

1
9
8
f Press and hold down guide roller
; Reel brake is disengaged.
2
f Remove the empty strap reel and dispose of it in
accordance with local regulations.
Empty reels are not taken back by the manufacturer.
f Set full strap reel
on reel rollers
1
; Strap reel uncoils clockwise.
1
; The collar of reel brake
Overhead suspension 3080.
f Feed strap over guide roller
4
closure chain guide .
5
f Make sure that strap
4
f With the teeth facing up, introduce the end of strap
into the opening in ATS3080
f Close latch on the ATS3080
8
; The red LED in the display goes out.
Assembly Instructions Overhead suspension 3080 • 03-2017 • v02 • 102-01013
.
3
.
9
holds the strap reel on the
2 1
and through eyes
3 6
is not twisted.
.
7
.
7

6 .5 Changing the closure reel

7
2
3
4
5
6
7
f Press and hold down guide roller
f Reel brake
is disengaged.
7
f Remove the empty closure reel and dispose of it in
accordance with local regulations.
Empty reels are not taken back by the manufacturer.
f Set full closure reel
; Closure reel uncoils anti-clockwise.
1
; The collar of reel brake
Overhead suspension 3080.
of
f Feed closure chain
f Introduce closure chain
into closure chain guide
4
f Feed closure chain
ATS3080 .
6
f Make sure that the closure chain
Maintenance
1
.
2
on the reel rollers .
1 3
holds closure reel on the
7 1
over guide roller .
4 2
with the number facing up
4
.
5
through closure chain guide
4
is not twisted.
4
2
3
4
5
6
to
5
13