Herunterladen Diese Seite drucken

Bosch SCT 416 L1 Originalbetriebsanleitung Seite 13

Laserprojektor

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
3.2
Safety information on the product
Laser class
The class of the laser device indicates the level of
potential danger associated with its accessible laser
radiation.
Fig. 2:
Label on the laser unit
In the case of Class 2 laser devices, the accessible laser
beam remains in the visible spectral range (400 nm to
700 nm).Reflex reaction of the eyelids
If a person accidentally looks into the laser for a short
period of time, the eye will be protected by the eyelid.
Class 2 laser devices may therefore be used without
further precautionary measures if the user is definitely
not required to either look into the laser intentionally
for extended periods of time (>0.25 s) or repeatedly
look into the laser or at directly reflected laser
radiation.
!
The protective reflex of the eyelid may become
slower if a person is under the influence of
medication. This increases the risk of laser-induced
eye injuries. In this case, it is advisable to wear laser
safety glasses of protection level R1.
i
Complies with 21 CFR 1040.10 and 1040.11 "except
for deviations pursuant to Laser Notice No.50, dated
June 24, 2007".
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Robert Bosch GmbH
Product description | SCT 416 L1; ACC 100/200 | 13 | en
4.
Product description
The laser units are fastened to the rear wheels of the
vehicle by means of the multiquick clamps. The laser
beam emitted is parallel to the axis of the vehicle.
4.1
Laser unit SCT 416 L1
Fig. 3:
SCT 416 L1 (wide scale)
1 Opening for laser beam
2 Scale for measuring the observational error
3 Socket pin
4 Battery compartment cover
4.2
Laser unit ACC 100/200
Fig. 4:
ACC 100/200 (narrow scale)
1 Opening for laser beam
2 Scale for measuring the observational error
3 Socket pin
4 Battery compartment cover
|
1 690 386 045 2018-10-26

Werbung

loading

Diese Anleitung auch für:

Acc 100Acc 200