Herunterladen Diese Seite drucken

Ismatec MCP Process ISM 915 Betriebsanleitung Seite 23

Werbung

TUBE I.D.
mm
PROGRAM
PUMP
rpm
Flow rate
MODE
DISP
Time
Volume
1
PAUSE
Time
TOTAL
CAL
2
3
CAL
4
TUBE I.D.
mm
PROGRAM
PUMP
rpm
Flow rate
MODE
DISP
Time
Volume
1
PAUSE
Time
TOTAL
CAL
2
3
CAL
4
MCP Process/Ismatec SA/15.11.2000/CB/
GP
Default-Kalibration Fließrate
1 Mit der MODE-Taste auf
PUMP Flow rate
2 CAL-Taste drücken
(Anzeige blinkt)
3 Reset/MAX/MIN-Taste drücken
Die Fließrate wird auf den
Standardwert zurückgesetzt
4 Mit CAL-Taste speichern
❖ ❖ ❖ ❖ ❖ Setzt gleichzeitig auch das
Volumen auf den Standard-
wert zurück
Default-Kalibration Volume
1 Mit der MODE-Taste auf
DISP Volume
2 CAL-Taste drücken
(Anzeige blinkt)
3 Reset/MAX/MIN-Taste drücken
Das Volumen wird auf den
Standardwert zurückgesetzt
4 Mit CAL-Taste speichern
❖ ❖ ❖ ❖ ❖ Setzt gleichzeitig auch die die
Fließrate auf den Standard-
wert zurück
Calibrant reset of flow rate
1 Change mode to
PUMP Flow rate
2 Press the CAL button
(displayed value blinks)
3 Press Reset/MAX/MIN button
The flow rate is reset to the
default value
4 Confirm with the CAL button
❖ ❖ ❖ ❖ ❖ At the same time, the volume
is also reset to the default
value
Calibrant reset of volume
1 Change mode to
DISP Volume
2 Press the CAL button
(displayed value blinks)
3 Press Reset/MAX/MIN button
The volume is reset to the
default value
4 Confirm with the CAL button
❖ ❖ ❖ ❖ ❖ At the same time, the flow
rate is also reset to the default
value
Calibration par défaut (débit)
1 Passer avec la touche MODE
sur PUMP Flow rate
2 Presser la touche CAL
(l'affichage clignote)
3 Presser la touche Reset/MAX/
MIN. Le débit est remis à la
valeur par défaut (valeur par
défaut clignote).
4 Mémoriser avec la touche CAL
❖ ❖ ❖ ❖ ❖ Le volume est également
remis à sa valeur par défaut.
Calibration par défaut (volume)
1 Passer avec la touche MODE
sur Volumme
2 Presser la touche CAL
(l'affichage clignote)
3 Presser la touche Reset/MAX/
MIN. Le volume est remis à la
valeur par défaut (valeur par
défaut clignote).
4 Mémoriser avec la touche CAL
❖ ❖ ❖ ❖ ❖ Le débit est également remis à
sa valeur par défaut.
23

Werbung

loading