HBM T40FM Montageanleitung Seite 11

Safety information
ted, installed and operated by untrained personnel. Every
person involved with siting, starting-up, operating or re­
pairing a torque flange must have read and understood
the mounting instructions and in particular the technical
safety instructions. The transducers can be damaged or
destroyed by non-designated use of the transducer or by
non-compliance with the mounting and operating instruc­
tions, these safety instructions or any other applicable
safety regulations (safety and accident prevention regula­
tions), when using the transducers. Transducers can
break, particularly in the case of overloading. The break­
age of a transducer can also cause damage to property
or injury to persons in the vicinity of the transducer.
If the torque flange is not used according to the desig­
nated use, or if the safety instructions or specifications in
the mounting and operating instructions are ignored, it is
also possible that the transducer may fail or malfunction,
with the result that persons or property may be adversely
affected (due to the torques acting on or being monitored
by the torque flange).
Conversions and Modifications
The transducer must not be modified from the design or
safety engineering point of view except with our express
agreement. Any modification shall exclude all liability on
our part for any damage resulting therefrom.
Selling on
If the torque flange is sold on, these mounting instruc­
tions must be included with the torque flange.
T40FM 9
A3276-8.0 HBM: public