Werbung
Adjusting the Squeegee (after serial # 1081110)
1
Park the machine on a flat, even surface.
2
Lower the squeegee.
3
Loosen the (horizontal) squeegee mount lock bolt (found on right side next to the recovery hose tube).
4
Loosen the locking nut on the (vertical) tilt adjustment bolt on the squeegee tongue.
5
Turn the adjustment bolt with a wrench to tilt the tool forward or backwards, until the rear squeegee wiping blade touches the floor across
its entire width.
6
Re-tighten both the adjustment nut and mount lock bolt.
Rear Squeegee Blade
Tilt Adjustment Bolt
Locking Nut
Squeegee Mount Lock Bolt
FORM NO. 041289 / BA 700, BA 800, BA 1000 - 33
Werbung
