C) Getting Started With The Weather Station - Conrad DV322 Bedienungsanleitung

c) Getting started with the weather station

• Open the battery compartment on the back of the weather station.
• Insert four size AA/mignon batteries of the same type with correct polarity (observe plus/+
and minus/-) into the battery compartment. You will find the corresponding illustration in the
battery compartment.
Once the batteries have been inserted, all available display elements appear briefly and the
display illumination is activated.
• Close the battery compartment.
• The reception symbol for the DCF signal blinks on the top left of the display (see arrow in
the illustration below) together with the weather symbols of the different display sections.
The bottom of the display shows "SEARCH SIG." = search for the signal.

As already mentioned in chapter 9, you have to keep a sufficient distance to
electric/electronic devices, metal parts, cables, etc.
Do not move the weather station during the first reception attempt.
It may take between 3-10 minutes until the DCF reception for the time and the
date is finished.
62
Very good reception
Good reception
Bad reception
No reception