Conrad DV322 Bedienungsanleitung Seite 63

• If "COUNTRY" appears on the bottom of the display, set your home country with the buttons
"" and "" (e.g. "D/GER" for Germany) and confirm this setting by briefly pressing the
button "SET".
Now the display shows "CITY" (select city). With the buttons "" and "", you can select
a city near to your place of residence.
Confirm the setting by briefly pressing the button "TEST" on the back of the weather station.
A small tick appears above the name of the city.

You can select altogether 5 cities; of course, you can also make this setting
later on. It is also possible to delete a city already selected for display and save
another one (see chapter 12).
If you do not set the country and the city as described above, the weather
station automatically sets "Germany" for the country and "Frankfurt/Main" for
the city. Of course, you can change this later on (see chapter 12. e) and 12. f).
• Now the display shows various already available weather data for today and tomorrow.
• Then the weather station searches for the outdoor sensor and the symbol "OUT" blinks in
the display section for the temperature/air humidity. This takes approx. 2-3 minutes. Wait for
that period, do not press any buttons.

If there is still no display of the outdoor temperature/humidity after 2 to 3
minutes, place the outdoor sensor in a different location (not directly next to the
weather station, keep a distance of at least 1 m).
Then press the button "IN/OUT" for approx. 3 seconds to start the search for
the outdoor sensor again.
The symbol "OUT" blinks again, the outdoor sensor is searched.
63