SATA paint set 10 Betriebsanleitung Seite 40

Operating Instructions SATA FDG
EN
Second gun connection [1-4] / [7-6]
For connecting a second gun.
6. Scope of Delivery
■ Material pressure tank, depending on the variant
■ Key for refill opening
7. Technical Design
7.1. SATA paint set 10
Material pressure tank SATA paint set 10 [1]
[1‑1] SATA paint set 10 with
manual agitator
SATA paint set 10 with
[1‑2]
pneumatic agitator with
gear
SATA paint set 10 with
[1‑3]
single pressure reducer
[1‑4] SATA paint set 10 with
double pressure reducer
and second gun connection
Single pressure reducer
[2‑11] Material supply ball valve
[2‑12] Material supply connection
[2‑13] Safety valve
[2‑14] Ventilation valve
[2‑15] Material pressure controller
[2‑16] Spraying air connection
Double pressure reducer
[3‑11] Material supply ball valve
[3‑12] Material supply connection
[3‑13] Safety valve
[3‑14] Ventilation valve
[3‑15] Material pressure controller
[3‑16] Spraying pressure
controller
Second gun connection
[4‑5] Material supply ball valve
[4‑6] Material supply connection
Spraying air ball valve
[4‑7]
40
[1‑5] Container lid
[1‑6] Material supply connection
Clamp
[1‑7]
Pressure tank
[1‑8]
Ventilation valve
[1‑9]
[1‑10] Toggle screw
[1‑11] Double pressure reducer
[1‑12] Handle
[2‑17] Spraying air ball valve
[2‑18] Single pressure reducer
[2‑19] Compressed air supply ball
valve
[2‑20] Compressed air supply
connection
[3‑17] Double pressure reducer
[3‑18] Spraying air connection
[3‑19] Compressed air supply ball
valve
[3‑20] Compressed air supply
connection
[4‑8] Spraying air connection