SATA paint set 10 Betriebsanleitung Seite 35

Operating Instructions SATA FDG
Contents [Original Version: German]
1. General information ...............35
2. Safety Instructions .................37
3. Intended Use .........................39
4. Description ............................39
5. Versions .................................39
6. Scope of Delivery ..................40
7. Technical Design ...................40
8. Technical Data .......................42
9. First Use ................................43
Read these operating instructions thoroughly and carefully before com-
missioning and use. Comply with the safety instructions and danger
warnings!
Always make sure that these operating instructions are kept with the
product or keep them easily accessible for everyone at any time!
1. General information
1.1. Introduction
These operating instructions contain important information for operating
the SATA paint set 10, SATA FDG 24 and SATA FDG 48, hereinafter ma-
terial pressure tank. They also describe commissioning, operation, main-
tenance and servicing, care and storage as well as troubleshooting.
1.2. Target group
This operating manual is intended for
■ Painting and varnishing professionals.
■ Trained personnel for varnishing work in industrial and craftman's work-
shops.
1.3. Accident prevention
As a basic principle, the general and specific national accident prevention
regulations must be heeded, together with corresponding workshop and
industrial safety instructions.
Read first!
10. Normal Operation ..................45
11. Maintenance and repairs .......48
12. Care and storage ...................55
13. Malfunctions ..........................55
14. After Sale Service ..................56
15. Accessories ...........................56
16. Spare Parts ...........................57
17. EU Declaration of
Conformity .............................60
EN
35