Beko HNU51630SH Bedienungsanleitung Seite 9

3 Using the appliance
3.1 Use of the appliance
A B C
1 2
A: 1. Stage
Operates the appliance on 1st spe-
Button
ed. When you press this button again
to turn off the appliance, the screen
speed stage turns off.
B: 2. Stage
Operates the appliance on 2nd spe-
Button ed. When you press this button again
to turn off the appliance, the screen
speed stage turns off.
C: Digital Shows the selected speed and war-
Display
ning symbols.
D: 3. Stage
Operates the appliance on 3rd spe-
Button ed. When you press this button again
to turn off the appliance, the screen
speed stage turns off.
E: Light On You may illuminate the cooking area
/ Off
by pressing this button. Re-press the
button to turn off the lamp.
Cleaning Periods of Metal Filters:
Filters must be cleaned when the "C" signal is
seen on the display (once every 60 hours) or every
4 weeks (depending on usage). After the filters are
cleaned and mounted, press the A button for more
than 3 seconds to clear the "C" signal (when the
product is off). The letter E will appear on the dis-
play and normal operation will commence. If you
want to continue operating without deleting the C
signal, when you press any of the step buttons,
the active speed will appear for 1 second and the
motor will continue to operate at the selected step
with the C signal appearing again.
Automatic Stop 15 minutes:
Your appliance has an automatic stop feature in
order to remove unwanted odour and steam re-
maining in the environment after the cooking pro-
cess has finished and for the appliance to turn it-
self off after conducting a ventilating process for a
period of time. To activate the automatic stop fea-
Cooker Hood / User Manual
D E
1
ture; press the same button for the current speed
(A,B,D) for 3 seconds. After 15 minutes of opera-
tion, all functions of your appliance will stop. If you
press the same speed button while the automatic
stop feature is active, the automatic stop function
will be disabled and the motor of the appliance will
stop. This feature will be disabled when you switch
to different speed levels. It is necessary to activate
the automatic stop feature of the device.
3.2 Energy efficient usage
• When using your appliance, adjust the speed
settings according to vapour and odour intensity,
in order to save energy.
• Use low speeds (1-2) under normal conditions,
and high speed (3) and boost mode for intense
odour and vapour.
• The hood is equipped with lamps in order to illu-
minate the cooking area.
• Using them for environmental lighting shall
cause unnecessary energy expenditure and in-
sufficient lighting.
• For your device to consume less energy, run it at
a low speed level.
• Your device will reduce energy consumption as
it will run more efficiently when you provide suf-
ficient air intake to it.
• Set your device to the intense suction power
level before the formation of steam, in cases
where you know that the dense steam will occur.
So, you reduce energy consumption by using
your device for a shorter time as it will have a
sufficient air intake.
• Keep the lids of the cookware closed to reduce
the steam evolving.
3.3 Operating the hood
• Your appliance contains a motor that has various
speeds.
• For better performance, we recommend using low
speeds under normal conditions and high speeds
in cases of strong odours and intense vapour.
9 / EN