Beko HNU51630SH Bedienungsanleitung Seite 10

3 Using the appliance
• You can start your appliance by pressing on the
desired speed setting button. (A, B, D).
• You may illuminate the cooking area by pressing
the lamp (E).
3.4 Lamp replacement
MAX 3 W
Lamp
Power
3 W
Socket GZ 10
Voltage
220 – 240 W
Dimension
53 x 50 mm
ILCOS Code DR/F3-220-240-GZ10-50-53
Luminous flux
260 lm
Correlated colour
3000 K
temperature
This product contains a light source of energy ef-
ficiency class "F".
• A halogen LED lamp is used in this product
• A lamp with a maximum of 3W must be used
when changing the lamp.
• Remove the aluminum cartridge filter. Remove
the faulty lamp and replace it with the one hav-
ing the same value.
10 / EN
C
You may procure lamps from
Authorised Service Agents.
WARNING: Cut the power supply
A
of the hood. Lamps may burn your
hands while hot, so wait for them to
cool down.
• If the appliance breaks down or
gets damaged, shut down the fuse
or unplug the appliance and call
the authorised service agent.
• If the supply cable is damaged, it
must be replaced by the manufac-
turer, its service agent or similarly
A
qualified personnel to avoid any
danger.
• Shut down the fuse or unplug the
appliance in case of breakdown
of the lamps of the appliance.
Replace immediately the faulty
lamps in order to prevent other
lamps from being overloaded (wait
for the lamps to cool down first).
3.5 Operation with chimney
connection
• Vapour is extracted through the
flue duct, which is fastened to
the connection head on the
hood.
• The diameter of the flue duct must be the same
as the connection ring. In horizontal settings, the
pipe has to have a slight upward slope (around
10º) so that the air can exit the room easily.
Cooker Hood / User Manual