Beko HNU51630SH Bedienungsanleitung Seite 12

4 Cleaning and maintenance
The device should be cleaned and maintained
regularly. Failure to keep the device clean will
adversely affect the service life of the device. For
cleaning and maintenance, follow the instructions
stated in the manual.
C
Before cleaning and maintenance,
unplug the product or turn off the
switch.
Non-compliance with the provisions
associated with the cleaning of the
device and replacement of the filters
may result in a risk of fire. Therefore,
it is recommended to follow the
guidelines stated here. The man-
ufacturer is not responsible for the
engine damages or fires originating
from the improper use.
Clean using only a cloth dampened with a neutral
liquid detergent. Do not use abrasive products or
alcohol.
4.1 Cleaning of the grease filter
This filter retains the oil particles in the air. Grease
filter may change colour as they are washed; this
is normal and does not require replacing your
grease filter.
• Push the grease filter lock forward.
12 / EN
• Then pull it slightly down and pull it out. Oth-
erwise, you can bend the filter. Wash and rinse
Grease filter with liquid detergent and replace
grease filter to their sockets by carrying out the
steps specified above in reverse order. This filter
retains the oil particles in the air.
C
You may wash your grease filter in
the dishwasher.
A
CAUTION: In case of normal use,
clean your filter once in a month.
4.2 Replacement of Carbon Filters
Odour removing filters contain charcoal (Active
carbon). Grease filter must be installed in the prod-
uct, regardless of whether or not carbon filters are
used.
• Remove the grease filter.
• To remove the carbon filter, remove the car-
bon filter from its housing by rotating it coun-
ter-clockwise from the tab.
• Install the new carbon filter.
• Install the grease filter.
Cooker Hood / User Manual