Beko HNU51630SH Bedienungsanleitung Seite 15

5 Setting up the device
• As the bends and elbows in the
aluminum pipe will cause de-
crease in the air suction power,
A
using these must be avoided as
much as possible.
• During the installation phase; After
the foil is removed, any traces of
foil must be wiped off with a damp
cloth.
Figure 5
1. Kitchen cabinet bottom view
2. 4x3,9x32 hood installation screw
• Place the hood into the kitchen cabinet and at-
tach the hood to 4 installation holes drilled be-
fore (Figure 5).
5.5 Storage
• If you do not intend to use the appliance for a
long time, please store it carefully.
• Please make sure that the appliance is un-
plugged, cooled down and totally dry.
• Store the appliance in a cool and dry place.
• Keep the appliance out of the reach of children
5.6 Handling and transportation
• During handling and transportation, carry the
appliance in its original packaging. The packag-
ing of the appliance protects it against physical
damages.
• Do not place heavy loads on the appliance or
the packaging. The appliance may be damaged.
Cooker Hood / User Manual
• Dropping the appliance will render it non-opera-
tional or cause permanent damage.
1
2
15 / EN