Herunterladen Inhalt Inhalt Diese Seite drucken

Scope Of Delivery; Symbol Explanation; Maintenance And Cleaning - Conrad BAR 899 HG Bedienungsanleitung

3-kanalfunk-wetterstation
Inhaltsverzeichnis

Werbung

2. Scope of delivery

• Weather station with table stand
• Remote sensor with table stand
• Operating instructions

3. Symbol explanation

The lightning flash with arrow head within a triangle is used to alert
you to potential personal injury hazards such as electric shock.
The exclamation point within a triangle is intended to alert the user
to important notes in these operating instructions which are to be
observed.
The "hand" symbol gives you tips and notes on the unit operation.
44
11. Handling
• Protect your base unit against moisture, hot and cold temperature, dust and
direct sunlight (operation is only allowed in dry indoor locations).
• Although the remote sensor is designed for outdoor installation and
operation, it has to be installed in protected locations, e. g. under a carport.
Protect the unit from direct exposure to water or snow as this can cause
damage to it. Moreover, direct sunlight, rain, snow or the like may
negatively affect the measurement accuracy of the remote sensor!
Do not immerse the remote sensor in water or other liquids.
Coldness (e. g. during operation in winter) can have a negative influence on
battery life time; this can cause problems resulting in reduced transmission
range (this particularly concerns rechargeable batteries).
When operating outdoor, the remote sensor must be mounted/installed in a
place where it cannot be stolen/abstracted!
• Never disassemble the product. Have the unit repaired only by an
experienced technician otherwise the unit's approval and guarantee will
expire.
• Do not drop the product even from a low height as this can damage it.

12. Maintenance and cleaning

The product requires no servicing except for battery replacement.
Clean the product with a soft, clean, dry and lint-free cloth. If you wish to clean
the product intensively, use a cloth, slightly moistened with lukewarm water.
You can clean the display of the base unit with a clean, soft brush or a vacuum
cleaner in order to avoid scratches.
Never use solvent-based cleansing agents, since this might damage the
surface of the plastic housing and inscription.
73

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis