Inhaltsverzeichnis
Werbung
m) Manual time/date setting
If reception problems occur, before making the setting by hand,
switch off the DCF reception first and then simultaneously press
the "MODE" and " " buttons until the DCF icon disappears).
To manually set the time/date, proceed as follows:
• Press and hold the "MODE" button for three seconds. The hour setting on
the bottom display line starts flashing.
• Change the hour format by pressing the " " or " " buttons; you can select
either the common 24-hour format or the 12-hour format.
If you do not wish to change a setting, briefly press the "MODE"
button to skip to another one.
If you do not press any button for a minute, the last setting will be
stored and the setting mode will automatically be exited.
• Confirm the entry by briefly pressing the "MODE" button.
• The hour indicator is flashing. Press the " " or " " buttons to set the
desired hour.
A quick setting can be done by holding down the " " or " "
buttons for an extended period of time.
• Confirm the entry by briefly pressing the "MODE" button.
• The minute indicator is flashing. Pressing the " " or " " buttons will set the
desired minute.
• Confirm the entry by briefly pressing the "MODE" button.
• The year indicator is flashing. Pressing the " " or " " buttons will set the
desired year.
• Confirm the entry by briefly pressing the "MODE" button.
• Then, you can select the desired date display format ("DD MM JJ" or
"MM DD JJ"; DD = Day, MM = Month, YY = Year).
66
b) The rear of the base unit
K
L
M
N
O
S N O O Z E
S N
Z E
P
Q
51
Werbung
Inhaltsverzeichnis
