Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
Cordless Impact Wrench
M odel
Voltage
No-Load speed
Capacity (Ordinary bolt)
Tightening torque
(M axim um )
2.0 Ah
Rechargeable
2.6 Ah
battery
3.0 Ah
Weight
Charger
M odel
Charging voltage
2.0 Ah
Charging tim e
2.6 Ah
3.0 Ah
Weight
All charge tim es are approxim ate. Actual charge tim e m ay vary.
" x" Indicates that the battery pack is not com patible w ith that specific charger.
BATTERY REM OVAL/ INSTALLATION
1. Battery removal
Hold the handle 3 tightly and push the battery latch
2 to rem ove the battery 1 (See Fig. 1 ).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery 1 w hile observing its polarities
(See Fig. 1).
CHARGING
〈UC14YFA, UC24YFA〉
Before using the im pact driver or im pact w rench, charge
the battery as follow s.
1. Connect the charger's pow er cord to a receptacle
When the pow er cord is connected, the charger's
pilot lam p w ill blink in red (At 1-second intervals).
Table 1
Before
Blinks
charging
(RED)
Lights
While
(RED)
charging
Blinks
Charging
(RED)
com plete
Charging
Flikers
im possible
(RED)
Charging
Lights
im possible
(GREEN)
5
WR9DM R
9.6 V
M 6-M 14
115 N·m
EB9B: Ni-Cd
EB1220BL: Ni-Cd
EB926H: Ni-M H
EB1226HL: Ni-M H
EB930H: Ni-M H
EB1230HL: Ni-M H
1.4 kg
UC14YFA
7.2 – 14.4 V
50 m in.
65 m in.
70 m in.
0.6 kg
Indications of the lam ps
Lights for 0.5 seconds. Does not light for
0.5 seconds. (off for 0.5 seconds)
Lights continuously
Lights for 0.5 seconds. Does not light for
0.5 seconds. (off for 0.5 seconds)
Lights for 0.1 seconds. Does not light for
0.1 seconds. (off for 0.1 seconds)
Lights continuously
WR12DM R
WR14DM R
12 V
0 – 2600 m in
-1
160 N·m
195 N·m
EB14B: Ni-Cd
EB1426H: Ni-M H
EB1430H: Ni-M H
1.6 kg
UC24YFA
7.2 – 24 V
50 m in.
65 m in.
70 m in.
0.6 kg
2. Insert the battery into the charger
Insert the battery firm ly, until it contacts the bottom of
the charger com partm ent.
CAUTION
If the battery is inserted in the reverse direction, not
only recharging w ill becom e im possible, but it m ay
also cause problem s in the charger such as deform ed
recharging term inal.
3. Charging
When inserting a battery in the charger, charging
w ill com m ence and the pilot lam p w ill light up
continuously in red.
When the battery becom es fully recharged, the pilot
lam p w ill blink in red (At 1-second intervals) (See
Table 1).
(1) Pilot lam p indication
The indications of the pilot lam p w ill be as show n in
Table 1, according to the condition of the charger or
the rechargeable battery.
WR18DM R
14.4 V
18 V
M 10-M 16
220 N·m
EB1820L: Ni-Cd
EB1826HL: Ni-M H
EB1830HL: Ni-M H
1.8 kg
2.0 kg
UC18YG
7.2 – 18 V
50 m in.
x
x
0.3 kg
M alfunction in the battery
or the charger.
The battery tem perature
i s
h i g h ,
recharging im possible.
m aki n g
Werbung
