Werbung
Verfügbare Sprachen
Verfügbare Sprachen
In case of doubt, do not use the water cleaner but contact an authorised service centre so that a Skilled
Technician can check the appliance
3.1 Identification Label and Warning Labels
See Fig. A at the front of these operating and maintenance instructions.
The identification label (18) contains the serial number and the main technical specifications of the
water cleaner.
The warning labels contain information regarding any further risks that may exist when using the water
cleaner and their meaning is explained below.
• Warning plate (29): indicates that the water cleaner must not be used unless the operating and
maintenance instructions have been read carefully beforehand.
• Caution plate (27): indicates that the water cleaner must not be used to wash people, animals, electrical
appliances or the high pressure cleaner itself.
WARNING
• After removing the appliance from the packing materials, check that the identification label and the
warning labels are present and are legible. If this is not the case, contact your dealer or an authorised
service centre so they can be replaced.
• If the identification label and the warning labels deteriorate during use, contact your dealer or an authorised
service centre so they can be replaced.
3.2 Standard Accessories
Make sure that in the product package that was bought there are the following elements:
• high-pressure water cleaner;
• high-pressure delivery pipe with fast coupling (only CLASSIC);
• hose reel complete with high-pressure delivery pipe (only EXTRA);
• water gun;
• lance hose;
• rotojet (only EXTRA);
• operator's instruction book;
• accessory bag containing:
- lance hose nozzle disassembling wrench,
- nozzle cleaning pin,
- water suction hose-holding connector,
- water suction filter;
• bag containing (only EXTRA):
- knob and lever for hose reel (13),
- water cleaner/hose reel connecting pipe (25),
- accessory support (26).
In case of problems, apply to the dealer or to an authorised service centre.
3.3 Optional Accessories
The standard accessories for the high pressure cleaner can be integrated with the following vast range
of accessories:
• Sandblasting lance: designed for smoothing down surfaces, eliminating rust, paint, deposits etc.
• Pipe-draining probe: designed for unblocking pipes and ducts.
• Underbody lance: designed to reach the most difficult areas of access.
• Rotating water jet brush: designed for cleaning delicate surfaces.
• Rotojet: designed to eliminate the toughest dirt.
• Foaming lance: designed for the most efficient distribution of detergent.
WARNING
• The operation of the water cleaner may be impaired if unsuitable accessories are used and they may even
make it dangerous. Only use original accessories endorsed by the Manufacturer.
Refer to the documents provided with the optional accessories for information regarding their general
use, safety warnings, installation and maintenance.
20
Werbung
