PNI P17UV Benutzerhandbuch Seite 26

6. Execute the key sequence [MENU] [2][8] [MENU] [0] [] [0] [MENU] to select the
channel (eg: 10)
7. The channel has been saved.
8. Stop and restart the transceiver. Press and hold the MENU key to switch to MR channel
mode. The channel number will reappear on the screen.
Repeaters programming
The instructions below are valid if you know the transmission and reception frequencies that the
repeater uses and that you are authorized to use them.
1. Long press MENU key to switch to VFO frequency mode. The VFO icon appears on the
right side of the screen.
2. Using the numeric keypad, enter the transmit frequency of the repeater (which is the
receive frequency for you).
3. Press the MENU key to access the menu.
4. Press the [2][6] keys to set the Offset direction.
5. Press the MENU key, then the ▲/▼ keys to set Plus (positive) or Minus (negative).
6. Press the MENU key to save.
7. Optional:
User manual 26