PNI P17UV Benutzerhandbuch Seite 21

Enabling or disabling Dual Watch mode
Press MENU - [7] keys to acces the menu no. 7: D. Wait.
Press the MENU key to enter the menu.
Press the ▲/▼ keys to switch between Off and On.
Press the MENU key to confirm.
Press the EXIT key to exit.
When one of the A or B frequencies (VFO/MR) is active, the transceiver will transmit on that
channel by default.
Cursor A/B
Press the EXIT key to move the cursor up/down. Then, you can modify and confirm the
parameter indicated by the cursor.
In frequency mode, you will see two different frequencies on the screen, while in channel mode
you will see two different channels.
In frequency or channel mode, press the EXIT key to switch between channel A and subchannel
B. The cursor indicates on the screen which channel (or subchannel) you are operating on.
Hi/Lo power selection
In channel mode, press the #SCAN key to switch between high power (H) and low power (L).
21 User manual