PNI P17UV Benutzerhandbuch Seite 13

MENU [6]
1. Short press to access the menu. Press the keys ▲ and ▼ to navigate through the menu.
Press the MENU key to enter a certain function. Use the keys ▲ and ▼ to navigate
through the options of a function. Press the MENU key to confirm a selection.
2. Long press the MENU key to switch between frequency mode (VFO) and channel mode
(MR). To save frequencies, you must be in VFO mode.
▲ / ▼ key
Press the key for at least 2 seconds to quickly increase/decrease the frequency or channel. In
SCAN mode, press this key to indicate the scanning direction.
EXIT key [8]
Press this key to exit the menu or the selected function.
In dual display mode, press this key to move the cursor up (area A) / down (area B). The frequency
or channel selected on the screen becomes the frequency or channel for transmission and
reception. To save a frequency on a channel, zone A must be selected.
Long press this key to display the battery voltage on the screen.
13 User manual