PNI P17UV Benutzerhandbuch Seite 23

Press again to activate strobe mode. Press once more to turn Off the flashlight.
1000Hz, 1450Hz, 1750Hz, 2100Hz Tone-burst
To send a tone (selectable bymenu no. 35), press the Monitor key while holding down the PTT
key. The most common tone used by radio amateurs in Europe is 1750Hz.
Go to menu no. 35 (R-TONE) to select the desired tone: 1000Hz, 1450Hz, 1750Hz, 2100Hz
Manual programming (Channels memory)
Frequently used frequencies can be memorized so that they can be used whenever needed.
999 memories are available. Each memory can store the following information: transmission
and reception frequency, transmission power, bandwidth, ANI/PTT-ID settings, alphanumeric
identifier (6 characters) of the channel or channel name.
Frequency mode vs. Channel mode
Long press the MENU key to switch between frequency mode and channel mode. These two
modes have different functions and are often confused.
Frequency Mode (VFO): Used for a temporary frequency assignment, such as a test frequency
or quick field programming if permitted.
23 User manual