How To Activate The Rinse Aid Dispenser - AEG GS55AIW Benutzerinformation

German de- French degrees
grees (°dH)
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators ,
flash and the display is blank.
2. Press .
• The indicators
• The indicator
• The display shows the current
setting: e.g.
3. Press
again and again to
change the setting.
4. Press the on/off button to confirm
the setting.
6.3 Use of rinse aid and multi-
tablets together
When you activate the option Multitab,
the rinse aid dispenser no longer
releases rinse aid. However if you are
using multi-tablets and the drying results
are not satisfactory, we suggest to use
multi-tablets and rinse aid together. In
this case you have to activate the rinse
aid dispenser.
mmol/l
(°fH)
65 - 75 6.5 - 7.5
51 - 64 5.1 - 6.4
40 - 50 4.0 - 5.0
33 - 39 3.3 - 3.9
26 - 32 2.6 - 3.2
19 - 25 1.9 - 2.5
7 - 18 0.7 - 1.8
<7 <0.7
and until
and start to
and go off.
continues to flash.
= level 5.
Clarke de-
grees
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
The rinse aid dispenser will remain
activated until you modify the setting
again
How to activate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators ,
flash and the display is blank.
2. Press .
• The indicators
• The indicator
flash.
• The display shows the current
setting:
deactivated.
3. Press to change the setting.
= rinse aid dispenser activated.
4. Press the on/off button to confirm
the setting.
5. Adjust the dosage of rinse aid.
6. Fill the rinse aid dispenser.
ENGLISH
Water softener lev-
el
8
7
6
1)
5
4
3
2
2)
1
and until
and start to
and go off.
continues to
= rinse aid dispenser
9