How To Activate The Rinse Aid Dispenser - AEG GS45BVM Benutzerinformation

68 www.aeg.com
German de-
grees (°dH)
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
flash and the display is blank.
2. Press
• The indicators
• The indicator
flash.
• The display shows the current
setting: e.g.
• The acoustic signals sound: e.g. 5
intermittent signals = level 5.
3. Press
the setting.
4. Press the on/off button to confirm
the setting.
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
French degrees
(°fH)
76 - 83
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
and
, and
.
and
continues to
= level 5.
again and again to change
mmol/l
7.6 - 8.3
6.5 - 7.5
5.1 - 6.4
4.0 - 5.0
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
<0.7
Use of rinse aid and multi-
tablets together
When you activate the option Multitab,
the rinse aid dispenser no longer
releases rinse aid. However if you are
using multi-tablets and the drying results
until
are not satisfactory, we suggest to use
multi-tablets and rinse aid together. In
start to
this case you have to activate the rinse
aid dispenser.
The rinse aid dispenser will remain
go off.
activated until you modify the setting
again
How to activate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
flash and the display is blank.
2. Press
• The indicators
• The indicator
flash.
Clarke de- Water softener lev-
grees
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
, and
.
and
continues to
el
9
8
7
6
1)
5
4
3
2
2)
1
and until
start to
go off.