Activating The Rinse Aid Dispenser; Technical Data; Environment Concerns - AEG FAVORIT 55030 Benutzerinformation

Activating the rinse aid dispenser

1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Turn the programme knob until the display shows two horizontal status bar.
4. Press and hold button Multitab and button Delay at the same time until the indica-
tors ,
5. Release button Multitab and button Delay.
6. Press button Delay.
– The indicators
– The indicator
– The display shows the setting of the rinse aid dispenser.
7. Press button Delay to change the setting.
8. Deactivate the appliance to confirm.

TECHNICAL DATA

Dimensions
Water supply pressure
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
The rating plate on the inner edge of the appliance door shows the electrical connection
data.
If the hot water comes from alternative sources of energy, (e.g. solar panels, photovoltaic
panels and aeolian), use a hot water supply to decrease energy consumption.

ENVIRONMENT CONCERNS

The symbol
treated as household waste. Instead it should be taken to the appropriate collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
and flash.
and go off.
continues to flash.
Width
Height
Depth
Minimum
Maximum
1) Cold water or hot water
Place settings
on the product or on its packaging indicates that this product may not be
The rinse aid dispenser is off.
The rinse aid dispenser is on.
21
Technical data
596 mm
850 mm
625 mm
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
maximum 60 °C
12