How To Activate The Rinse Aid Dispenser; Acoustic Signals - AEG FAVORIT 55522WO Benutzerinformation

28 www.aeg.com
Downloaded from www.Manualslib.com
3. Press Program again and again to
change the setting.
4. Press the on/off button to confirm
the setting.
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
How to use rinse aid and multi-
tablets together
By default when you activate the option
Multitab, the rinse aid dispenser no
longer releases rinse aid. However if you
are using multi-tablets and the drying
results are not satisfactory, we suggest to
use multi-tablets and rinse aid together.
In this case you have to activate the rinse
aid dispenser.
The rinse aid dispenser will remain
activated until you modify the setting
again
How to activate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and Start
until the indicators
and
and the display is blank.
2. Press Option.
• The indicators
off.
• The indicator
flash.
• The display shows the current setting.
– = rinse aid dispenser
deactivated.
manuals search engine
3. Press Option to change the setting.
4. Press the on/off button to confirm
5. Adjust the dosage of rinse aid.
6. Fill the rinse aid dispenser.

6.4 Acoustic signals

Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic
signal is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
1. To enter the user mode press and
2. Press Delay
• The indicators
,
start to flash • The indicator
• The display shows the current setting:
and go
continues to 3. Press Delay to change the setting.
4. Press the on/off button to confirm
– = rinse aid dispenser
activated.
the setting.
hold simultaneously Delay and Start
until the indicators
and
and the display is blank.
and
go off.
continues to
flash.
– = Acoustic signal off.
– = Acoustic signal on.
the setting.
,
start to flash