TR-Electronic CD 582 Serie Gesamt-Bedienungsanleitung Seite 319

First, a Name and an IP Address are assigned, the SNN is created automatically. Then
confirm the settings via OK.

Close window Select Module Type.

The parameterization of the measuring system can now be changed at any time in
the project by double-clicking on the measuring system. Alternatively, the
parameterization can also be made via the right mouse button -> Properties.

In the New Module window under Module Definition click the Change button
-> in the Module Definition window select the TR Grey Channel 1 module
and confirm with OK:
Printed in the Federal Republic of Germany
04/20/2021 TR-ECE-TI-DGB-0370 v01
 TR-Electronic GmbH 2021, All Rights Reserved
Page 41 of 51