Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cleaning the cabinet
Clean only with a damp, soft cloth and a commercially available mild
household cleanser. Ensure that no water gets inside the equipment to
prevent possible shorts and damage to the equipment.
CAUTION!
Note on using the supplied safety test leads according the IEC / EN
61010-031:2015:
Measurements in the field of overvoltage category CAT I or CAT II can be
performed with test leads without sleeves with a maximum of up to 18mm
long, touchable metallic probe, whereas for measurements in the field of
overvoltage category CAT III or CAT IV test leads with put on sleeves, printed
with CAT III and CAT IV must be used, and therefore the touchable and
conductive part of the probes have only max. 4mm of length.
1. Introduction
This instrument is a compact, rugged, battery operated, handheld 3 ½ digit
multimeter for measuring DC and AC voltage, DC current, resistance and
diode. The dual-slope A/D converter uses C-MOS technology for auto-
zeroing, polarity selection and overrange indication. Full overload protection is
provided.
2. Features
*
Single 5 positions easy to use rotary switch for function selection
*
13 mm high contrast LCD
*
Automatic overrange indication with the "OL" displayed
*
Automatic polarity indication on DC ranges
*
Diode testing with 1 mA fixed current
*
Hold-function
*
Flash-light
*
Non-contact voltage detector
*
Resetable fuse
*
Test leads separable with 4mm Socket/Plug
-19-
Werbung
Inhaltsverzeichnis
