Percent Determination; Entering The Reference Weight By Weighing - KERN pej Betriebsanleitung

10.3. Percent determination

Percent weighing allows to display weight in percent, in relation to a reference
weight. The displayed weighing value is stored as a standard percent value
(default setting: 100%).
10.3.1.

Entering the reference weight by weighing

Operation
Activate function [q SET 3]
(see chap. 7).
The display shows the %-symbol.
Determine reference weight:
Press for about 4 seconds, until
[P.�SET] is displayed, then
release
Put on reference weight (=100 %)
An acoustic signal sounds; the reference
weight is saved.
Remove reference weight.
PES/PEJ-BA-e-1617
Display
q�SET�3
z0
The display shows flashing the last
saved reference weight
EnD
10z0
�
%
��
��
%
��
47