Num'axes Canicom 200 First Gebrauchsanleitung Seite 23

Gb - 23
- Activate : approach the red mark located on the remote control until coming in contact on red mark
located on the receiver collar for 1 second (ref. Diagram 4). The indicator light on the collar will flash in
green indicating that the CANICOM receiver is on.
- Deactivate : approach the red mark located on the remote control until coming in contact on red mark
located on the receiver collar for 1 second (ref. Diagram 4). The indicator light on the collar will flash
from green to red and then off: the CANICOM receiver is off.
To increase the battery life of the receiver collar, you should deactivate the unit if you are not using
your CANICOM 200 FIRST for a long period.
Diagram 4
Approach until coming in contact those 2 areas
during 1 second
REMOTE CONTROL
RECEIVER COLLAR
 Coding of the remote control and receiver collar
Each remote control has its individual radio operator code. The coding of the remote control with the
receiver collar enables to couple your remote control with the receiver provided.
IMPORTANT: before beginning the coding (first use of the receiver or re-coding), make sure no
other person is using his CANICOM 200 FIRST or other products from the NUM'AXES range close
by: your receiver collar could accidentally record the code of his remote control. If that occurs,
re-code the remote control with the receiver collar.