Checking/Replacing Battery Of Receiver Collar; Changing The Contact Points - Num'axes Canicom 200 First Gebrauchsanleitung

« + » of the battery
must be visible
When the battery is empty, you can not use the remote control. If pressing a button, the LED located
on the front of the remote control will not light.

Checking/Replacing battery of receiver collar

To check the condition of the receiver collar battery, observe the indicator light located on the front of the
receiver collar:
• Battery fully charged: flashes slowly green.
• Weak battery: flashes quickly red. Replace it with a new battery 3-V Lithium CR2 (See § Fitting the
battery in the receiver collar). Check the receiver collar operates correctly.
NUM'AXES advises to use the same type and same brand of batteries as those supplied in your new
purchased product. Other brands of batteries may not operate, or may not be completely compatible
with your product.
You can purchase the suitable batteries from NUM'AXES or from your distributor.

Changing the contact points

Two different series of contact points are supplied. The length of the contact points must be sufficient to
have proper contact with the dog's skin, enabling the device to operate correctly.
Gb - 26
Diagram 5