Malfunctions; Malfunctions With Error Messages - Speck-Pumpen Poolregelung BADU Logic 3 Montageanweisung Und Bedienanleitung

Z.1. Malfunctions with error messages
(LED flashes +
warning symbol)
Possible error messages:
Sensor x faulty ---------------->
Restart ------------------------------> Means that the controller was restarted, for exam-
32

Malfunctions

If the controller detects a malfunction, the
red light flashes and the warning symbol
also appears in the display. If the error
is no longer present, the warning symbol
changes to an info symbol and the red
light no longer flashes.
To obtain more detailed information on the
error, press the key under the warning or
info symbol.
Danger
Notes for the specialist:
Means that either the sensor, the sensor input
at the controller or the connecting cable is/was
faulty.
(see "B.2. Temperature resistance table for
PT1000 sensors" on page 5).
ple due to a power failure. Check date and time!
Do not try to deal with this
yourself.
Consult a specialist in the
event of an error!