deuter ALPROOF Serie Benutzerhandbuch Seite 21

16
TROUBLESHOOTING
Malfunction
The airbag does not
deploy when the
activator is pulled.
The autotest is not
working.
Self-test (autotest)
result is negative
Check the LED
The airbag does not
fully inflate.
The AA batteries are not
charging the system.
17
AUTHORIZATION
All declarations of conformity can be retrieved from
www.deuter.com/conformity
Certified by TÜV SÜD Product Service GmbH, Daimlerstr. 11,
85748 Garching bei München, Germany. Certification station
number CE 0123. Certified to: EN 16716:2017.
Alproof
XXXX-XX
EN 16716:2017
Alproof-Booklet_Insert-23-RZ.indd 14 Alproof-Booklet_Insert-23-RZ.indd 14
Diagnosis
1. Is the E2 enabled? Check the LED
2. Are the supercapacitators sufficiently charged (is the LED lit orange or green)?
3. Was the autotest successful? Check the LED.
Are the supercapacitators sufficiently charged to start the motor?
Wait until the LED is lit orange or green.
Check to make sure the compressor wheel is not get blocked by ice or snow.
Dry the system thoroughly before using again.
A malfunction can be explained by the following :
1. The airbag was rolled up instead of properly folded.
2. The fabric or foreign materials have become stuck in the zipper.
3. The pressure release button is blocked in the deflation position and is preventing the
backpack valve from closing correctly.
Make sure to use new, high-quality alkaline or lithium AA/LR6 batteries.
Do not use AA zinc carbonate batteries, Ni-Cd, or NiMH rechargeable batteries.
Product model / Product name
WARNING! Before using the product, please read the operating instructions
carefully (PPE).
Date of manufacture: Year-month
The CE marking ensures the product meets the legal requirements of the
PPE Regulation (EU) 2016/425
Eurasian Conformity Mark
Credential for personal protective equipment meeting the EU technical standard and
used for design and CE certifications.
This device meets FCC Part 15 provisions. The following two conditions govern its ope-
ration: (1) The device may not cause any material damage and (2) the device must pre-
vent damage, including damage that can cause undesired deployment.
The EU Conformity Declaration is available at www.deuter.com/conformity
EN
The deuter avalanche backpacks meet the regulations and
safety requirements of EU Standard EN 16716:2017 - Moun-
taineering equipment - Avalanche airbag systems - Safety
requirements and testing methods. All authorized backpacks
feature the corresponding seals confirming the official tests.
They are clearly visible and must not be removed.
29.03.22 19:33 29.03.22 19:33