Replacing Of The Illuminant; Trouble Shooting; Possible Cause - Pkm GT 250 A++ M Bedienungsanleitung

5.2 Replacing of the illuminant

WARNING! The LED-illuminant (depending on model) must be
replaced by a competent person only. If the LED-illuminant is damaged,
please contact a qualified professional.

6. Trouble shooting

POSSIBLE CAUSE

1. The plug of the appliance is not
connected to the socket.
2. The plug has become loose.
3. The socket is not supplied with
energy.
4. The fuse is switched off.
5. The voltage is too low.
1. Incorrect energy supply.
1. The appliance has been switched off
for a while.
2. Too much or too hot food in the
appliance.
3. Doors opened too often or too long. 3. Do not open the door too often/too
MALFUNCTION
T
HE APPLIANCE DOES NOT WORK AT ALL
T
HE COMPRESSOR DOES NOT WORK AT ALL
T
HE COMPRESSOR OPERATES FOR TOO LONG
MEASURE
1. Connect the appliance to the mains
properly.
2. Check the plug.
3. Check the corresponding socket by
connecting it with another appliance.
4. Check the fuse box.
5. Compare the data on the model
plate with the data of your energy
supplier.
1. Check the energy supply.
1. The appliance needs some time to
reach the preset temperature.
2. Remove any hot food.
long.
63
.
.
.