Replacing Of The Power Cord - Pkm GS 83.4 A++T Bedienungsanleitung

WARNING! Do not use hairdryers, electrical
heaters or other technical devices to accelerate the
defrosting-progress. RISK OF ELECTRICAL SHOCK!
1. Remove the contents from the fridge and put them into
a cooling box.
2. Switch off the appliance by turning the thermostat to
position 0 / AUS / OFF and disconnect it from the
mains or use a cut-off device.
3. Place a container in front of the appliance to catch the
water.
4. When the encrusted ice melts put some dry cloths into
the freezer-compartment to hold the water back.
5. Do not use hot water to accelerate the defrosting
operation.
6. Remove the big pieces of ice first.
7. Afterwards remove the small pieces of ice.
8. Wipe and dry the appliance and door seals with dry and
soft cloths.
9. After cleaning leave the door open for some time to
ventilate the appliance.

6.2 Replacing of the power cord

DANGER!
by a qualified and authorized professional only.
The power cord must be replaced
128