Key Lock; Setting Of The Temperature - Pkm GT 250 A++ M Bedienungsanleitung

4.4 Key lock

1. Press the
KEY LOCK BUTTON
2. The
KEY LOCK
locked.
 After 30 seconds without using any operation buttons, the
display goes off.
 If you press any operating button within 30 seconds, the
display indicates normal operation.
 In case of a malfunction of the category -visible error code-
the display indicates the respective error code and goes off
after 30 seconds.
1. Press the
KEY LOCK BUTTON
2. The key lock will be disabled and the operating buttons are
released again.
If the
KEY LOCK
carried out.

4.5 Setting of the temperature

 The settings of the temperature of the freezer can be adjusted manually by
pressing the relevant buttons (C / D to increase or decrease the temperature in
the freezer) until the desired values will be indicated (s. chapter 4.3 C
/ O
PANEL PERATING BUTTONS
 When you set a temperature, you set an average temperature for the whole
freezer. Temperatures inside each area of the freezer may vary from the
temperature values indicated on the display, depending on how much food you
store and where you place them. Ambient temperature may also affect the actual
temperature inside the appliance.
To perform the following settings the display must be unlocked.
H
OW TO ACTIVATE THE KEY LOCK
(A) for 3 seconds.
is activated and the operating buttons are
H
OW TO DEACTIVATE THE KEY LOCK
(A) for 3 seconds.
is activated, none of the following settings below can be
/
DISPLAY
).
54
:
:
ONTROL