Installation; Space And Ventilation Requirements - Pkm GT 250 A++ M Bedienungsanleitung

3. Installation

1. Unpack the appliance carefully. Dispose of the packaging as described in
chapter waste management.
2. Remove all packaging materials.
3. The accessories of your appliance can be protected from damage due to
transportation (adhesive tapes etc.). Remove such tapes very carefully. Remove
remains of such tapes with a damp cloth using lukewarm water and a mild
detergent (see also chapter
components of the back of the appliance!
4. Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
5. Check that the appliance and the power cord are not damaged.
6. Install the appliance in a dry and well-ventilated place.
7. Protect the appliance from direct sunlight.
8. The doors must open completely and without hindrance.
9. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
10. Connect the appliance to the mains properly.
11. The rating plate is inside the appliance or at the back.

3.1 Space and ventilation requirements

Observe the required minimum distances for proper ventilation.
All dimensions in this chapter are given in centimetres.
The figures shown in the following chapters (3.1.1 / 3.1.2) are examples only.
Modifications are possible.
CLEANING AND MAINTENANCE
45
). Never remove any