Replacing Of The Illuminant; Trouble Shooting; Possible Cause - Pkm GT 320 A++ M Bedienungsanleitung

1. Remove the content, wrap in several layers of newspaper and store in a cooling
box or a cool place.
2. Switch off the appliance by turning the thermostat to OFF
from the mains.
3. Place a container at the water outlet to collect the melt water.
4. Open the water outlet.
5. Drain the defrost water via the water outlet.
6. Wipe and dry the appliance (in- and outside) and door seals using dry and soft
cloths.
7. After cleaning leave the door open for a while to aerate the appliance.
8. Switch on the appliance and let it operate in the F
approx. 3 hours.

5.2 Replacing of the illuminant

WARNING! The LED-illuminant
person only. If the LED-illuminant is damaged, please contact a qualified
professional.

6. Trouble shooting

POSSIBLE CAUSE

1. The plug of the appliance is not
connected to the socket.
2. The plug has become loose.
3. The socket is not supplied with
energy.
4. The fuse is switched off.
5. The voltage is too low.
1. Incorrect energy supply.
12 depending on model
13 depending on model
MALFUNCTION
The appliance does not work at all.
The compressor does not work at all.
AST
13
must be replaced by a competent
MEASURE
1. Connect the appliance to the mains
properly.
2. Check the plug.
3. Check the corresponding socket by
connecting it with another appliance.
4. Check the fuse box.
5. Compare the data on the model
plate with the data of your energy
supplier.
1. Check the energy supply.
59
12
and disconnect it
F
REEZING MODE
for