Symbols On The Product - Husqvarna 540XP Mark III Bedienungsanweisung

13. Starter rope handle
14. Starter housing
15. Chain oil tank
16. Muffler and sprark arrester screen
17. Chain brake and front hand guard
18. Front handle
19. Right hand guard
20. Clutch cover
21. Clutch drum
22. Oil pump adjustment screw
23. Chain tensioning screw
24. Chain catcher
25. Spiked bumper
26. Saw chain
27. Guide bar
28. Bar tip sprocket
29. Brake band
30. Guide bar cover
31. Operator's manual
32. Combination wrench
33. Bar nut
34. Product and serial number plate

Symbols on the product

Stop.
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Always wear approved protective helmet,
approved hearing protection and eye
protection.
Use 2 hands to operate the product.
Do not let the guide bar tip touch an
object.
204
Do not operate the product with one hand
only.
Warning! Kickback can occur when the
guide bar tip touches an object. A
kickback causes a lightning fast reverse
reaction that throws the guide bar up and
in the direction of the operator. Can cause
serious injury.
This product complies with applicable EC
Directives.
This product conforms to applicable UK
regulations.
Noise emission to the environment label
as per European Directive 2000/14/EC,
UK directives and regulations and New
South Wales legislation "Protection of the
Environment Operations (Noise Control)
Regulation 2017". The guaranteed sound
power level of the product is specified in
Technical data on page 237 and on the
label.
Chain brake, engaged (right). Chain
brake, disengaged (left).
Air purge bulb.
Adjustment of the oil pump.
Fuel.
Chain oil.
yyyywwxxxx
Note:
Other symbols/decals on the product refer to
certification requirements for some markets.
The rating plate shows se-
rial number. yyyy is the
production year and ww is
the production week.
1679 - 006 -