Herunterladen Inhalt Inhalt Diese Seite drucken

Symbols On The Product; Rating Plate; Product Liability - Husqvarna K 7000 Chain Bedienungsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

11. Spray guard
12. Bar nuts
13. Keyway, 7 splines

14. Rating plate

15. Power pack connection
16. Water connection inlet with water valve
17. Combination wrench
18. Water connectors
19. Keyway, 9 splines
20. Husqvarna high frequency power pack (necessary,
not supplied)
21. Operator's manual

Symbols on the product

WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
protection. Refer to
equipment on page 6 .
Dust forms when cutting. The dust can
cause injuries if inhaled. Use an approved
respiratory protection. Always provide for
good ventilation.
Sparks from the guide bar and the diamond
chain can cause fire in fuel, wood, clothes,
dry grass or other flammable materials.
Kickbacks can be sudden, rapid and violent
and can cause life threatening injuries. Read
and understand the instructions in the
manual before using the product. Refer to
Kickback on page 11 .
Make sure that the diamond chain does not
have cracks or other damages.
Do not use diamond chains to cut wood.
1455 - 003 - 03.03.2020
Personal protective
This product complies with applicable EC
Directives.
Environmental mark. The product or
package of the product is not domestic
waste. Recycle it at a recycling location for
electrical and electronic equipment.
Note: Other symbols/decals on the product refer to
certification requirements for some markets.
Rating plate
Husqvarna K7000 Chain
HID 970449701 4NE
2019 472000402
Husqvarna AB
561 82 Huskvarna SWEDEN
5500W 8800rpm 16 /450mm
Made in Sweden
Row 1: Brand, model
Row 2: Product id
Row 3: Manufacturing year, serial number
Row 4: Manufacturer
Row 5: Manufacturer address
Row 6: Output power, output shaft rpm, cutting
attachment maximum size
Row 7: Country of origin

Product liability

As referred to in the product liability laws, we are not
liable for damages that our product causes if:
the product is incorrectly repaired.
the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
the product is not repaired at an approved service
center or by an approved authority.
3

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis