Technical Data - Husqvarna 540XP Mark III Bedienungsanweisung

To prepare your product for long-term
storage
1. Stop the product and let it become cool before you
disassemble it.
2. Disassemble and clean the saw chain and the
groove in the guide bar.
CAUTION:
guide bar are not cleaned, they can
become rigid or blocked.

Technical data

Engine
Cylinder displacement, cm
Cylinder bore, Ø mm
Stroke length, mm
Idle speed, rpm
Maximum engine power acc. to ISO 7293, kW/hp @ rpm
21
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Fuel tank capacity, liter/cm
Oil tank capacity, liter/cm
Type of oil pump
Weight
Weight, kg
22
Noise emissions
Sound power level, measured dB(A)
Sound power level, guaranteed L
23
Sound levels
21
Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.
22
Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive
2000/14/EC.
23
Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent
sound pressure level is a standard deviation of 1 dB (A).
1679 - 006 -
If the saw chain and
Technical data
3
3
3
dB(A)
WA
3. Attach the transportation guard.
4. Clean the product. Refer to
on page 224 for instructions.
5. Do a complete servicing of the product.
540XP Mark III
39.1
40
31.1
3000
1.9/2.6 @ 10500
NGK CMR7H
0.65
0.37/370
0.23/230
Adjustable
4.1
111
112
Maintenance schedule
237