Herunterladen Inhalt Inhalt Diese Seite drucken

Aiwa ACD-24KBTU Gebrauchsanweisung, Installationsanleitung Seite 5

Vorschau ausblenden Andere Handbücher für ACD-24KBTU:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 33
SAFETY RULES AND RECOMMENDATIONS FOR THE
INSTALLER
1. Do not bend, tug or compress the power cord since
this could damage it. Electrical shocks or fire are
probably due to a damaged power cord. Specialized
technical personnel only must replace a damaged
power cord.
2. Do not use extensions or gang modules.
3. Do not touch the appliance when barefoot or parts
of the body are wet or damp.
4. Do not obstruct the air inlet or outlet of the indoor or
the outdoor unit. The obstruction of these openings
causes a reduction in the operative efficiency of the
conditioner with possible consequent failures or
damages.
5. In no way alter the characteristics of the appliance.
6. Do not install the appliance in environments where
the air could contain gas, oil or sulphur or near
sources of heat.
7. This appliance is not intended for use by persons
(including children ) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
8. Do not climb onto or place any heavy or hot objects
on top of the appliance.
9. Do not leave windows or doors open for long when
the air conditioner is operating.
10. Do not direct the airflow onto plants or animals.
11. A long direct exposition to the flow of cold air of the
conditioner could have negative effects on plants
and animals.
12. Do not put the conditioner in contact with water.
The electrical insulation could be damaged and thus
causing electrocution.
13. Do not climb onto or place any objects on the
outdoor unit.
14. Never insert a stick or similar object into the
appliance. It could cause injury.
15. Children should be supervised to ensure that they
do not play with the appliance. If the supply cord is
damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in
order to avoid a hazard.
EN
ACD-24KBTU 5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis