Aiwa ACD-24KBTU Gebrauchsanweisung, Installationsanleitung Seite 18

2. Operation Safety
Must wear
Mind Static
protective clothing
Electricity
3. Installation Safety
Refrigerant Leak Detector
Appropriate Installation Location
The left picture is the schematic
diagram of a refrigerant leak detector.
Please note that:
1. The installation site should be well-ventilated.
2.
The sites for installing and maintaining an air
conditioner using Refrigerant R32 should be free
Tool Picture
Standard
Wrench
Adjustable/
Crescent
Wrench
Torque Wrench
Hex Keys or
Allen Wrenches
Drill & Drill Bits
Hole Saw
18 ACD-24KBTU
from open fire or welding, smoking, drying oven or
any other heat source higher than 548 which easily
produces open fire.
3. When installing an air conditioner, it is necessary to
take appropriate anti-static measures such as wear
anti-static clothing and/or gloves.
4.
It is necessary to choose the site convenient for
installation or maintenance wherein the air inlets
Don`t use
and outlets of the indoor and outdoor units should
mobile phone
be not surrounded by obstacles or close to any
heat source or combustible and/or explosive
environment.
5.
If the indoor unit suffers refrigerant leak during the
installation, it is necessary to immediately turn off
the valve of the outdoor unit and all the personnel
should go out until the refrigerant leaks completely
for 15 minutes. If the product is damaged, it is a
must to carry such damaged product back to the
maintenance station and it is prohibited to weld the
refrigerant pipe or conduct other operations on the
user's site.
6. It is necessary to choose the place where the inlet
and outlet air of the indoor unit is even.
7. It is necessary to avoid the places where there
are other electrical products, power switch plugs
and sockets, kitchen cabinet, bed, sofa and other
valuables right under the lines on two sides of the
indoor unit.
Tool Picture
Pipe Cutter
Screw drivers
(Phillips & Flat
blade)
Manifold and
Gauges
Level
Flaring tool
Clamp on Amp
Meter
Tool Picture
Vacuum Pump
Safety Glasses
Work Gloves
Refrigerant
Scale
Micron Gauge